20 Rising Stars To Watch In The Sliding Patio Doors Repair Industry

· 6 min read
20 Rising Stars To Watch In The Sliding Patio Doors Repair Industry

Sliding Patio Doors Repair

Sliding patio doors are ideal for enjoying your outdoor space, however they can become difficult to open or close. This can be due to a variety of problems like dirty tracks or misaligned sliders.

Start by cleaning the track and lubricating the rollers. You can also make use of the adjustment holes at the bottom of the panel to adjust the alignment of your rollers.

Tracks that are damaged or dirty

A sliding door that doesn't slide smoothly could be caused by an unclean or damaged track. Over time, dirt, grit, and even rust could build up, preventing the track to move smoothly. The solution is to clean the track thoroughly with an abrasive and mild detergent.  patio door lock repairs near me  is recommended to complete this task regularly to ensure the smooth operation of your door and prevent the need for expensive repairs down the road.

A door that is leaky is another common problem that requires immediate attention to avoid mold growth, water damage and structural deterioration. The most common cause is damaged weather stripping or misaligned doors. These can be corrected by replacing the weather stripping and aligning the door.

Another issue that can be fixed with a little DIY work is when rollers jump off the track. Recruit a friend to help you in this endeavor as the door could be heavy. To move the rollers around to the right position, sit inside the house and lean one of the panels toward you. When the panel is lifted off the bottom track, it's time to set it on sawhorses to prevent it from falling off. Then, loosen the screws that keep each roller in place and take them off using the help of a screwdriver. You can now clean any dirt that is caught between the wheel and the tracks. Clean each wheel using denatured alcohol as well as a rag, then reposition the wheels and reattach them to their tracks.

If a portion of the track is bent, it might be possible to straighten it with a rubber mallet or block of wood. If the bent portion is near hinges or has the potential to cause further damage, it's recommended to contact an expert.

Rollers that are not aligned

If your sliding door has difficulty sliding, it is likely that the rollers are not aligned correctly. The wheels may be dirty, rusted or their bearings are worn out. This friction causes the door to catch and grind when opened or closed. This can also make noises that sound like squeaking.

This is a straightforward fix. You don't need to remove the door to access the wheels, as they are on a bracket that is adjustable. Find the adjustment holes (usually on either side of the frame) and make use of a screwdriver to turn the screws that control the wheels. A clockwise rotation of the screw raises the wheel while a counterclockwise turn lowers it. Continue to adjust the door until it opens and closes smoothly.

It is essential to adjust the wheel prior to making adjustments to your latch. The latch hooks must be aligned with the strike plate (the opening into which the latch locks) in order for the lock to function correctly. If you don't, the latch could accidentally open or close while you're not in the room.

Patio doors that slide are a significant investment, and making sure they are operating properly can keep your family safe and secure. You can prevent costly repairs by fixing common issues like faulty tracks, rollers and handles. If you need help with your patio doors, call our team. We can assess your sliding patio door repair needs and help you keep it in good shape. Our professionals can also assist with any replacement parts you might require.

Loose or Damaged Door Frame

Sliding patios doors are an excellent addition to any home. They offer a convenient and attractive alternative to swing-open hinged or hinged doors for patios. But, just like any other type of hardware that they are, they could face various issues over time. Fortunately, most of these issues are simple to fix with a bit of DIY expertise.

A common issue with sliding patio doors is a gap in the frame. This can be caused by a number reasons, including tracks or rollers that are not aligned properly as well as a damaged or damaged door track or a bent frame. In most cases, the problem is easily solved by taking the doors out and reconnecting the track. It is important to be careful not to cause damage to the frame or track.

In certain instances it is necessary to replace the entire track. This can be easily accomplished using a universal replacement kit which is available at all major hardware stores. These kits are easy to install and will have your door working properly in no time at all.

It is essential to inspect the frame of your sliding door and hardware for signs of wear and tear, for instance loose bolts or screws. This is an easy and effective DIY patio maintenance procedure that is done using the help of a screwdriver. It is also crucial to grease the tracks and rollers of your patio door to ensure smooth operation and keep them from wearing out prematurely.

For many homeowners who live in the city, their patio doors are their primary entrance to their backyard and outdoor living space. In order to maintain peace and security within the home, it is essential that they function correctly. By following these simple DIY maintenance tips, homeowners can prolong the lifespan of their sliding patio door and cut down on costly repairs or replacements.

A faulty handle

Patio doors that slide open are an ideal way to enter your backyard and enter your home, but they can be difficult to operate if misaligned or damaged. A defective handle can cause the door not to open or close correctly. The good news is that fixing a loose handle is a fairly simple job that can be accomplished at home.

In most cases, a loose grip is a result of screws that have slipped out of the backplate. To remedy this problem, simply tighten the two screws on the inside of the handle using a screwdriver. If the handle remains loose, it could indicate that the threads are worn out and require replacement.

Or, a damaged latch might be the culprit. It is more likely that the latch will break if it's made of metal rather than plastic. If the latch is not catching or turning it, try oiling it first to see if it helps. If this doesn't work, you may need to replace the lock.

If the handle is cracked or broken, it can be difficult to operate. If this happens, you'll need to replace the handle with one that is in line with the style and design of your sliding patio doors.

If your patio doors are old and dated or new and brand new, Feldco can help you get them back on track. We offer a broad selection of high-quality patio doors in different sizes and styles. Contact us today to learn more about our doors! We provide homeowners with our services in Southern California, including Ventura County, Orange County & San Diego County.

Weatherstripping that isn't working properly

If you're seeing light around windows and doors that are closed or notice a draft pulsing on the window or door It's time to change your weather stripping. These strips create an airtight seal that stops unwanted air, pests and water from entering the home. They also help keep your heated and conditioned air in, saving you energy costs all year round.

It could have lost its positive seal, bouncy, due to age. It is easy to determine this by taking a dollar bill and putting it through the seal along the top of the door frame as well as the below the jamb of the door where the two meet. If the dollar bill slides between the seal and door with ease it is time to replace the weatherstripping.



If you replace only the worn-out part of the weather stripping, it could result in future issues with the seal. It is more efficient to replace all of the stripping. This will let you rest at ease knowing that your door will be sealed properly.

For an easy DIY project, follow our guide to weather stripping to take off the old weather stripping and then apply the right material to your sliding patio door and door frame to ensure a long-lasting solid, secure seal. This is a great method to save money on your energy bills and repair your sliding patio door. Don't wait until its too late. Your wallet as well as your home will be thankful.